Wheeled Base
Castors under the whole frame - push it to the crowd rather than mounting a fan above them.
30,000 CMH on castors - the compact of the three, for a single bay or aisle.
An HVLS fan turns a large diameter slowly instead of a small one quickly. The result is a broad, steady column of air rather than a narrow jet, which is why one unit does the work of a row of pedestal fans and is quiet enough to talk over while it runs.
The S130 puts that on a wheeled base. There is no roof mounting to arrange and no three-phase point to pull - it stands where you put it, runs off a 220V socket and moves to the next bay when the work does. For pricing, contact us today.
Every figure below is from the published sheet for this model - nothing interpolated.
What is actually built into this unit - the parts that decide how much air it moves, how much it draws and how often anyone has to touch it.
Castors under the whole frame - push it to the crowd rather than mounting a fan above them.
A PMSM drive holds torque down at low speed, which is where the volume comes from without the noise.
Speed control from 10 rpm to full, so one fan does a slow air change or a working breeze.
220V at 50Hz off an ordinary socket - no three-phase point to pull and no starter panel to build.
Light enough for the motor to turn a large diameter slowly, and unaffected by humid or dusty air.
One unit does the work of a row of pedestal fans, from a single socket and a single switch.
Anywhere a large volume of air has to move over people rather than machinery - and where nothing can be fixed to the roof to do it.
A ceiling HVLS fan covers one fixed bay and needs the structure to hang it. This one covers whichever bay you point it at, and the only thing it needs on site is a socket.
Size It for My ShedThe five things buyers ask us most about this model. Anything not covered here, pick up the phone - we would rather talk it through than have you guess.
+91 90330 00463It moves approximately 30,000 CMH and covers around 2000 sq. ft.. Talk to us to confirm how many units your particular area needs.
It is built for warehouses, workshops, production floors, showrooms, banquet halls and event grounds - anywhere a large volume of air has to move but nothing can be fixed to the roof.
The connected load is 0.45 kW drawing 3.1A on single phase, so it runs off an ordinary 220V socket.
Neither. It moves air only - no water, no pads and no ducting. Wheel it into position, plug it in and set the speed on the regulator.
It is quoted per project. We manufacture in Gujarat and export to 45+ countries - request a price through the enquiry form or call +91 90330 00463 for bulk, export and dealer enquiries.
Share your area and industry - we will revert with a layout suggestion and a clear quotation.
