Top Discharge
Mercury Top Discharge Air Cooler
- Airflow18,000 CMH
- Coverage1000 – 1200 sq. ft.
- Running load1.1 units/hr
Commercial Evaporative Air Coolers
The Earth range on castors, 18,000 and 22,000 CMH. Wheel it to the crowd - halls, showrooms, canteens and open seating, with no ducting and no civil work.
View Commercial Coolers
Industrial Evaporative Air Coolers
Ten models from 18,000 to 40,000 CMH, in top and bottom discharge. Built for production sheds and godowns - dust, vibration and long shifts.
View Industrial Coolers
Industrial Exhaust Fans
The Skyex range, 10,000 to 58,000 CMH across five sizes. Gives the hot air already in the building somewhere to go, so the cooling keeps working.
View Exhaust FansEvery cooler is fabricated, assembled and tested at our own facility in Gandhinagar.
Runs on up to 80% less electricity than a comparable air-conditioning system.
Water based cooling with zero harmful refrigerant gases and a very low carbon footprint.
Dedicated service helpline, spare parts and annual maintenance contracts across India.
Gandhinagar, Gujarat
Founded in 2015 by Bhavik Patel and Sandip Patel, Sky Air Cooler builds evaporative coolers and exhaust fans at its own plant in Gandhinagar, Gujarat. Every unit is made for the way Indian plants actually run - long shifts, dusty air and summers that push a shed past 45°C - and cools them without the running cost of conventional air conditioning.
Over 11 years we have installed across the country’s working belts: textile mills in Ahmedabad and Surat, engineering and auto units around Pune and Ludhiana, warehouses through the Delhi NCR corridor, and plants in Coimbatore, Jaipur and Rajkot. Our second office in Faridabad keeps the north covered. Alongside that, our units run in 45+ countries.
To lead the industrial air cooling industry by delivering superior products and services that precisely meet each client’s needs.
To become a global leader in industrial cooling through energy-efficient, environmentally sustainable and cutting-edge technology.
From 18,000 CMH commercial units to 58,000 CMH industrial exhaust fans - choose the configuration that matches your shed size, heat load and layout.
18,000 – 40,000 CMH
Heavy duty evaporative coolers built for large sheds, production plants and open floors. Four-side honeycomb pads and a high-static blower push cooled, filtered air deep into the working area.
18,000 – 22,000 CMH
Slimmer, quieter units for showrooms, restaurants, banquet halls, classrooms and garden seating. Same evaporative technology, tuned for spaces where noise and looks matter.
10,000 – 58,000 CMH
Wall mounted exhaust fans that clear hot, stale and fume-laden air quickly. Pair them with coolers to set up a full push-pull ventilation loop across the shed.
All 17 models in one place - filter by category or browse the lot, with airflow, coverage and running load listed on every card.
Top Discharge
Bottom Discharge
Top Discharge
Top Discharge
Bottom Discharge
Top Discharge
Top Discharge
Bottom Discharge
Top Discharge
Bottom Discharge
Movable
Movable
Exhaust Fan
Exhaust Fan
Exhaust Fan
Exhaust Fan
Nylon Blade
We do not just sell a cooler. We study your shed, calculate the heat load, design the layout, manufacture the unit and stay with you after installation.
Full control over sheet metal, blowers, pads and assembly means consistent quality and faster delivery.
Experienced engineers who understand airflow, heat load and ventilation - not just product catalogues.
Survey, design, ducting, installation, commissioning and AMC handled by a single accountable team.
Supplying India, USA, UAE, Saudi Arabia, Germany, Denmark, Australia, Greenland and the EU.
Lower purchase price, far lower running cost and minimal spares expense over the product life.
Dedicated service number, stocked spare parts and quick response for breakdown support.
Evaporative cooling works the way nature does - hot outside air is drawn through wet honeycomb pads, gives up its heat to evaporate the water, and enters your space cooler, cleaner and fresher.
Ambient air at 42°C is pulled in by the blower.
Water evaporates and absorbs the heat from the air stream.
Filtered air enters the shed 8–12°C cooler and dust free.
Textile mills, plastic and rubber units, foundries, packaging lines, cold-chain godowns, engineering workshops and poultry sheds - wherever heat, humidity or fumes make work uncomfortable, a Sky Air Cooler installation makes a measurable difference.
A structured five-step method - site survey, heat load calculation, layout mapping, installation and after-sales service - that removes guesswork and delivers the airflow you were promised.
Our engineer measures the shed, roof height, openings and existing ventilation.
Machine heat, occupancy and air-change requirement are calculated for every zone.
Cooler positions, duct routing and grill placement are drawn and shared for approval.
Units are built in-house, delivered and installed by our own commissioning team.
Scheduled maintenance, pad cleaning and genuine spares keep performance steady.
Enter your floor area and roof height to get the airflow your space needs in CMH, and how many coolers that works out to. For a precise proposal, our team will still run a full site survey.
Our weaving floor used to touch 44°C in May. After installing eight Sky coolers the temperature stays comfortable through the shift and our labour attendance has clearly improved.
We compared three vendors. Sky was the only one that came, measured the shed and gave a proper layout drawing before quoting. The installed airflow matched exactly what they promised.
Running cost was the deciding factor for our 40,000 sq. ft. warehouse. The electricity bill is a fraction of what an air-conditioning system would have cost us every month.
Service response has been genuinely quick. Pads and pump were replaced under the maintenance contract without us having to follow up repeatedly.
The shed doors stay open all day, so air conditioning was never an option for us. These coolers dropped the floor temperature noticeably without changing how we work.
Installation was finished inside the shutdown window they committed to. No rework, no surprise costs, and the team cleaned up before leaving.
From automobile plants and pharmaceutical units to universities, dairies and Indian Railways - a few of the names that rely on Sky Air Cooler.
Built in Gujarat and shipped worldwide - Sky Air Cooler units are installed and serviced across these markets.
Practical reading on evaporative cooling, ventilation design and workplace comfort.
Cooling Solutions
Buying Guide
Ventilation Guide
Maintenance, warranty and troubleshooting - the questions our service desk answers most often.
Service HelplineA typical industrial unit runs on a 1 to 2 HP motor plus a small pump. Compared with an air-conditioning system covering the same area, power consumption is usually around 80% lower.
Yes. Evaporative cooling is designed for continuous fresh-air replacement, so it performs well in semi-open and open areas where a sealed AC system cannot be used at all.
Pads should be inspected and flushed before every season and cleaned periodically depending on water quality and dust levels. Under an AMC our team handles this on a fixed schedule.
Coolers carry a manufacturer warranty on the body and motor, with defined terms for pads, pumps and consumables. Exact coverage is confirmed in writing with your order.
Check for clogged pads, a loose or slipping belt, and blocked air inlets. If the pads are wet but airflow is still low, call the service helpline and our engineer will diagnose the blower.
Yes. We install right across India - Gujarat, Maharashtra, the Delhi NCR belt, Punjab, Rajasthan, Tamil Nadu and beyond - with a second office in Faridabad covering the north. We also export to 45+ countries, including the USA, UAE, Saudi Arabia, Germany, Denmark and Australia.
Share your area and industry - we will revert with a layout suggestion and a clear quotation.
Plot No 21, 22 Satvan Industrial Park, Near Reliance Petrol Pump, Valad, Gandhinagar, Gujarat 382355
